This paint is a matt, white, tintable finish designed for interior
surfaces that does not require wiping, washing or scrubbing.
Where to Use
- Interior walls and ceilings .
Use in living rooms, bedrooms and hallways.
- Previously painted or primed interior surfaces.
Preparation
- Proper surface preparation is essential for paint adhesion.
Surface should be clean, dry and in good condition before painting.
- Remove loose paint, wash off any dirt and grease with detergent,
eliminate mildew stains with GLITTY Mildew
Stain Remover.
- Scuff sand glossy surfaces.
- Countersink nail heads, repair imperfections and sand smooth.
- Remove all dust with a damp cloth, allow to dry.
- Allow new stucco, plaster and masonry to cure for 30 days before
priming.
Prime
- Use GLITTY Primer & Sealer
Application
- Proper application technique and using quality application tools
are imperative for one-coat coverage. To ensure one-coat coverage,
apply the product at package consistency.
- Use product when the surface and air temperatures are between
5°and 35°C
- Stir paint occasionally. Intermix containers of same product to
ensure color uniformity.
- Use a high quality nap roller cover, nylon/polyester brush or an
airless sprayer.
- Coverage is 3-4 square meters per kilogram for each coat, depending on
the surface texture, porosity and application method.
- If needed, you may thin the paint with 10% water or more if using
a sprayer
Dry Time
- Dries to touch in 30 minutes at 25°C and 50% humidity. Longer dry time required in cooler temperatures and in
higher humidity.
- After two weeks, cured paint film may be cleaned with a mild,
non-abrasive liquid detergent.
Clean Up
- Use soap and water.
- Properly dispose of all soiled rags and protect unused product
from freezing.
** WARNING! Removal of old paint by sanding, scraping or
other means may generate dust or fumes that may contain lead. Exposure
to lead dust or fumes may cause serious health injury, especially in
children or pregnant women. Controlling exposure to lead or other
hazardous substances requires the use of proper protective equipment
such as a properly fitted respirator and proper containment and
cleanup.
|
